135+ Shed With Sheathing

www.shednation.com

```html

Introduction: Building Your Own 135+ Square Foot Shed with Sheathing Want to add valuable storage or workspace to your property? Building a shed is a rewarding DIY project. This guide will walk you through the process of constructing a sturdy 135+ square foot shed, focusing on proper framing and sheathing techniques. Remember to always check local building codes and obtain necessary permits before starting any construction.

Step 1: Planning and Design Before you grab any tools, careful planning is crucial. Decide on the exact dimensions of your shed (aiming for slightly over 135 square feet, perhaps 10x14), and sketch out your design. Consider door and window placement, as well as the overall aesthetic. Create a detailed materials list, including lumber for framing, sheathing (OSB or plywood), roofing materials, siding, fasteners, and hardware. Don't forget safety gear!

Step 2: Site Preparation and Foundation Choose a level location for your shed. Clear the area of vegetation and debris. A solid foundation is essential for a long-lasting structure. Options include a concrete slab, gravel pad with concrete blocks, or a pressure-treated lumber frame filled with gravel. For this guide, we'll assume a gravel pad with concrete blocks. Level the ground, add a layer of landscape fabric, and compact a base of gravel. Place concrete blocks at regular intervals to support the shed's base frame. Use a level to ensure all blocks are even.

Step 3: Building the Base Frame Construct the base frame using pressure-treated lumber. This frame will sit on top of the concrete blocks. Cut the lumber to the dimensions of your shed's footprint and assemble it using screws or nails designed for pressure-treated wood. Ensure the frame is square by measuring the diagonals; they should be equal. Add joists (also pressure-treated) within the frame, spaced 16 inches on center (O.C.), for added support. Secure the base frame to the concrete blocks using construction adhesive and appropriate fasteners.

Step 4: Framing the Walls Build the wall frames one at a time. Cut the lumber according to your design. Typically, wall studs are spaced 16 inches O.C. Assemble the wall frames using screws or nails. Include top and bottom plates. For window and door openings, create headers to support the load above the opening. Before raising the walls, check for squareness by measuring diagonals. Once the walls are framed, carefully raise them into place, ensuring they are plumb and level. Temporarily brace the walls to keep them upright.

Step 5: Connecting the Walls Securely connect the walls to each other and to the base frame using screws or nails. Add corner bracing to provide extra stability. Double the top plates for added strength and to tie the walls together. Recheck for plumb and level.

Step 6: Installing Sheathing Now it's time to add the sheathing (OSB or plywood). Cut the sheathing panels to size, overlapping edges as needed. Attach the sheathing to the wall frames using screws or nails. Ensure the sheathing is flush with the framing and that there are no gaps. Leave a small gap (approximately 1/8 inch) between sheathing panels to allow for expansion and contraction. This gap can be achieved by using a nail as a spacer. Stagger the sheathing joints for added strength.

Step 7: Building the Roof Frame The roof framing can be constructed using rafters or trusses. For a simple gable roof, rafters are a common choice. Cut the rafters to the appropriate length and angle. Install a ridge board at the peak of the roof to support the rafters. Space the rafters according to your design (typically 16 or 24 inches O.C.). Secure the rafters to the top plates and ridge board using screws or nails. Add collar ties to prevent the rafters from spreading.

Step 8: Sheathing the Roof Cover the roof frame with sheathing, following the same procedures as for the walls. Stagger the joints and leave a small gap between panels for expansion and contraction. Overhang the sheathing slightly beyond the edge of the roof frame.

Step 9: Roofing Install underlayment (roofing felt) over the sheathing to provide a waterproof barrier. Choose your roofing material (asphalt shingles, metal roofing, etc.) and install it according to the manufacturer's instructions. Pay close attention to proper overlap and sealing.

Step 10: Installing Doors and Windows Install the doors and windows according to the manufacturer's instructions. Ensure they are properly sealed to prevent leaks. Add trim around the doors and windows for a finished look.

Step 11: Siding and Finishing Choose your siding material (wood siding, vinyl siding, metal siding, etc.) and install it according to the manufacturer's instructions. Paint or stain the shed to protect it from the elements and enhance its appearance. Add any finishing touches, such as gutters, downspouts, and landscaping.

Conclusion: Enjoy Your New Shed! Congratulations! You've successfully built your own 135+ square foot shed. You now have a valuable storage or workspace that you can enjoy for years to come. Remember to maintain your shed regularly to keep it in good condition.

```

How To Make Backyard Storage Shed At Sandra Harding Blog

exouavehu.blob.core.windows.net

Cedarshed Studio 12x6 Shed [st126]

www.shednation.com

Shed Blueprints: Wooden Storage Shed

shedsblueprints.blogspot.com